Hydraulic auto-limbing formwork na xɔ kɔkɔwo .

Wotrɔ asi le Hydraulic Auto-Climbing Formwork (ACS) ŋu na xɔ kɔkɔwo kple tɔdzisasrãwo wɔwɔ. Ewɔa dɔ to eya ŋutɔ ƒe hadrolik-kɔkɔmɔ̃ zazã me. Nuɖoanyia me tsilindowo kple mɔ̃ siwo trɔa asi le nu ŋu le, si wɔnɛ be woate ŋu ali ke si li ke evɔ mahiã be woawɔ crane o.

Wotsɔa hadrolik-mɔ̃ si naa kpekpeɖeŋunamɔ̃ vevitɔ kple tolili ƒe ketekemɔ̃wo te ŋu kɔna ɖe vovo lae kpɔa wo ɖokui dzi. Nɔnɔme sia kpɔa egbɔ be hadrolik automatic toliliɖoɖo (ACS) le bɔbɔe, ewɔa dɔ kabakaba eye wòle dedie. Womehiã dɔwɔnu bubu aɖeke o, si wɔe be wònye tiatia nyui aɖe na xɔtudɔwo.

Nuɖoanyiae nye tiatia gbãtɔ na xɔ kɔkɔwo kple tɔdzisasrãwo tutu le eƒe dɔwɔwɔ nyuie kple kakaɖedzi ta. Tolili ƒe duƒuƒu anɔ abe milimeta 10 ene le sɛkɛnd ɖeka me, si wɔnɛ be woate ŋu azɔ to dzi nyuie le tsitrenu.

Woate ŋu atrɔ asi le auto-limbing formwork system ŋu eye wotsɔ gakpo si ƒe kɔkɔme nye meta 10-15 eye wòlia toa ƒe kɔkɔme nye meta 3-6. Eva le packaging si wozãna ɖaa me, eye wowɔ ɖoɖo siwo wowɔ ɖe ɖoɖo nu be woatsɔ akpɔ dɔa ƒe hiahiã vovovowo gbɔ.

Adzɔnuwo ƒe nɔnɔmetatawo kplɔ̃

ƒe nɔnɔmetata	ƒe asixɔxɔ .
Kpɔɖeŋu	Tolili ƒe nɔnɔmewɔwɔ .
Nu	Ga
Ƒomevi	auto-limbing formwork .
Kpekpeɖeŋu ƒe kɔkɔme .	10-15m .
Kɔkɔƒe ƒe kɔkɔme .	3-6m .
Mᴐbibia	Xɔ kɔkɔwo, gli siwo wotsɔ ƒo ƒu, tɔdzisasrãwo
Todzimɔzɔzɔ ƒe duƒuƒu .	10mm/Sɛkɛnd .
Nusiwo wobla ɖe agba me .	Standard Packaging .
Specification .	Woate ŋu atrɔ asi le eŋu .
Nudzadzra ŋkɔ	Lianggong .
Dzɔtsoƒe	China .
Nuwɔwɔ ƒe ŋutete .	200 sets ɣleti sia ɣleti .
Nudɔdɔ ƒe agbɔsɔsɔ suetɔ kekeake .	1 Set .
Trɔtrɔ ɖe nɔnɔmewo ŋu .	Eli
Subɔsubɔdɔ si wowɔna le nudzadzra megbe .	Ne esɔ ko
Mɔɖegbalẽ .	Ƒe 1 .

Features of hadrolik auto-limbing formwork .

Independent Hydraulic Auto-Climbing Formwork: Esɔ na xɔ kɔkɔwo kple tɔdzisasrã tutu, si naa kakaɖedzi le tsitrenu tolili.

Ŋusẽtsoƒe: Wotsɔa tsimɔ̃ si me pɔmpiwo, tsigoewo kple ami ƒe pɔmpiwo le, si me crane mehiã o.

Tolili kabakaba: Nuɖoanyia ate ŋu ali ke bɔbɔe le tsitrenu alo adi be yeadzi xɔtutu ƒe duƒuƒu ɖe edzi.

Stable synchronous climbing: auto-limbing formwork lialia le blibo alo akpa aɖe be woakpɔ egbɔ be liƒo, synchronization kple dedienɔnɔ.

Ðe afɔku si le nusiwo agblẽ le ame ŋu me dzi kpɔtɔ: auto-limbing formwork la gakpɔtɔ li vaseɖe esime wowu xɔa tutu nu, si ɖea teƒea ƒe nudidiwo dzi kpɔtɔna eye wòɖea afɔku si le nusiwo gblẽ me dzi kpɔtɔna.

Dɔwɔƒe si wɔa dɔ bliboe: Enaa dɔwɔƒe si wɔa dɔ ɖekae, si mehiã be woawɔ nuƒolanɔƒe bubu aɖeke o, si ɖea nuwo kple dɔwɔlawo ƒe gazazãwo dzi kpɔtɔna.

Ðe xɔtutu ƒe vodadawo dzi kpɔtɔ: Dzidzedzekpɔkpɔ bɔbɔe ate ŋu aɖɔ vodadawo ƒe ƒuƒoƒo ɖo ɖe ƒuƒoƒo ɖesiaɖe me be woakpɔ egbɔ be xɔtutua de pɛpɛpɛ.

Tolili kabakaba ƒe duƒuƒu: Nuɖoanyia lia kabakaba, si wɔnɛ be xɔa tutu ƒe ŋgɔyiyi kabakaba (le mama dedie nu le ƒuƒoƒo ɖesiaɖe me: ŋkeke 5).

Viɖe siwo le hydraulic auto-limbing formwork ŋu .

Xɔtutu bɔbɔe: Xɔtutu si me womewɔ naneke le o kple amewo ƒe ŋusẽ suetɔ kekeake, si sɔ nyuie na dɔ gãwo wɔwɔ.

Trɔtrɔ ɖe nɔnɔmewo ŋu ƒe tiatia: Woate ŋu atrɔ asi le didime kple amadede siwo woate ŋu atrɔ asi le ŋu (blɔ alo tiatia bubu siwo wowɔ ɖe ɖoɖo nu) be woatsɔ akpɔ dɔa ƒe nuhiahiãwo gbɔ.

Nyaƒoɖeamenu gã si te ŋu nɔa te ɖe enu: Ete ŋu nɔa te ɖe kɔkrit ƒe nyaƒoɖeamenu yeye si ade 80kn nu, si wɔnɛ be nuto siwo me wobiaa nu geɖe le la li ke.

Dzadzra megbe subɔsubɔdɔ blibo: si me mɔ̃ɖaŋununya ƒe kpekpeɖeŋu le Internet dzi, teƒea ɖoɖo, hehenana kple ŋkuléle ɖe dɔ ŋu le.

Dɔwɔwɔ le afisiafi: Esɔ na zazã vovovowo, siwo dometɔ aɖewoe nye xɔ kɔkɔwo, tɔdzisasrãwo, tɔdzisasrãwo kple kaƒomɔ̃wo.

Nuƒolanɔƒe ƒe ɖoɖo blibo: Enaa nuƒolanɔƒe blibo, nuƒolanɔƒe bubu aɖeke mehiã o.

Haidrɔlik auto-limbing formwork ƒe dɔwɔwɔwo .

Xɔ kɔkɔwo: sɔ na xɔ kɔkɔwo tutu si bia be woakɔ ɖe dzi le tsitrenu.

Dam: Esɔ na tɔdzisasrã gãwo tutu, si naa liƒo kple dɔwɔwɔ nyuie.

Tɔdzisasrã Tɔdzisasrã: Wozãnɛ tsɔ tua tɔdzisasrã sesẽ siwo nɔa anyi didina.

Cable Tower: Esɔ na elektrikŋusẽ ƒe mɔ̃ si wotsɔna tsɔa nyatakakawo yia teƒe bubuwo ƒe xɔ kɔkɔwo tutu.

Míaƒe subɔsubɔdɔa .

Aɖaŋuɖoɖo, aɖaŋuwɔwɔ kple nyayɔyɔ: Na ɖoɖo tɔxɛ ƒe ɖoɖo ƒe susuwo, aɖaŋu si wotu ɖe xɔtuɖoɖo ƒe nɔnɔmetatawo dzi, eye woana nyayɔyɔ siwo wowɔ ɖe ɖoɖo nu.

Adzɔnuwo wɔwɔ kple woƒe nyonyome me dzodzro: Nuwɔƒe gã siwo me wowɔa nu le deŋgɔwo le eye dɔnyala ƒe nyonyome me dzodzro ƒe ƒuƒoƒo aɖe kpɔa egbɔ be wowɔ nuawo ƒe dzidzenu kɔkɔwo.

Nubablɛwo kple ʋuɖoɖo: Wozãa nusiwo woɖona ɖe duta ƒe ɖoɖo si wozãna ɖaa tso adzɔnuwo wɔwɔ dzi va ɖo agbatsɔtsɔ dzi be woakpɔ egbɔ be wotsɔ wo yi teƒea kabakaba.

Mɔfiame si le adzɔge alo le teƒea: Na kpekpeɖeŋu le didiƒe alo teƒea na nya ɖesiaɖe be nàkpɔ egbɔ be susu ƒe akɔdzeanyi kple dzidzeme le ɖoɖoa katã me.

Nya siwo wobiaa amewo . 

1. Nukae nye hydraulic auto-limbing formwork zazã?

Wotrɔ asi le ɖoɖoa ŋu na xɔ kɔkɔwo kple tɔdzisasrãwo tutu, eye wònaa woɖoa to dzi le tsitrenu si li ke le xɔtutua me.

2. Viɖe kawoe le formwork lialia ƒe duƒuƒu ŋu?

Woate ŋu ali ke ʋua ƒe todzimɔ̃a kabakaba, eye woate ŋu awu dzisasrã ɖesiaɖe tutu nu le abe ŋkeke 5 ene me, si wɔnɛ be xɔa tutu yia edzi kabakaba ŋutɔ.

3. Ðe auto-limbing formwork la ate ŋu ali ɖe mɔ vovovowo dzia?

Ẽ, ɖoɖoa ate ŋu ali ke ɖe tsitrenu kple esi le tsia dzi, si ana woate ŋu atrɔ asi le xɔtutu ƒe nɔnɔme vovovowo ŋu.

4. Aleke ɖoɖoa kpɔa egbɔ be ele dedie eye wòli ke le tolili me?

Agbadɔ si wotsɔ wɔa xɔa la lia tona madzudzɔmadzudzɔe eye wònɔa ɣeyiɣi ɖeka me abe blibo ene alo le xɔtunuwo me be yeakpɔ egbɔ be ele dedie.

5. Ðe xɔdɔmeawo gakpɔtɔ le teƒea le etutu vɔ megbea?

Ẽ, womeɖea xɔdɔmeawo ɖa o vaseɖe esime wowu xɔa tutu nu, si ɖea afɔku si le nusiwo gblẽ le wo ŋu me dzi kpɔtɔna eye woɖea teƒe siwo hiã la dzi kpɔtɔna.