T-Form System si woatsɔ atu kɔnkrit gbadzɛwo tutu nyuie la dodo ɖe ŋgɔ

Le xɔtutu ƒe akpa si me ŋusẽ le me la, dɔwɔwɔ nyuie kple nuwɔwɔ pɛpɛpɛ le vevie ŋutɔ be woakpɔ dzidzedze. T-Form ɖoɖoa do abe egbɔkpɔnu yeye aɖe na kɔkrit-kpewo tutu ene, si na mɔnu si nye modular kple zazã bɔbɔe si doa dɔwɔwɔ ɖe ŋgɔ eye wònana be emetsonuwo le nyonyome deŋgɔ. Nyati sia gblɔ T-Form-mɔ̃a, eƒe akpa vovovoawo, alesi woƒoa wo nu ƒui, kple viɖe siwo le eŋu tsitotsito, si wɔe be wònye dɔwɔnu vevi aɖe na xɔtudɔwɔlawo.

Nukae nye T-Form System?

T-Form ɖoɖoa nye xɔtuɖaŋu ƒe kuxia gbɔkpɔnu yeye aɖe si wowɔ koŋ na kɔnkrit-kpewo tutu. Etsɔa xɔtunu sesẽwo tsakana kple nuwo ƒoƒo ƒu ƒe mɔ̃ siwo gɔme sese sesẽ, si wɔe be wònye tiatia nyui aɖe na aƒewo kple asitsadɔwo siaa. Nu vevi aɖewoe le ɖoɖoa me, eye wo dometɔ ɖesiaɖe wɔa akpa vevi aɖe le egbɔkpɔkpɔ be xɔtutua me mekɔ o me.

T-Form System ƒe Akpa Veviwo

Kpeɖeŋutɔ	Nuɖᴐɖᴐ
Titina Akɔtaƒuwo	Na xɔtuɖoɖo ƒe kpekpeɖeŋu eye nàkpɔ egbɔ be ɖoɖoa li ke eye wòsɔ ɖe ɖoɖo nu.
Axadziƒuwo (Didi & Kpuie) .	Na asitɔtrɔ le nɔnɔmewo ŋu be wòasɔ ɖe slab ƒe didime kple ɖoɖo vovovowo nu.
Dzogoe siwo wotsɔ ƒu gbe	Na dzogoewo ƒe kadodo siwo me kuxi aɖeke mele o nanɔ bɔbɔe, si ana xɔtuɖoɖo ƒe blibonyenye nanyo ɖe edzi.
Adzɔnuwo domedomenuwo	Na woƒe akpa vovovoawo nasɔ ɖe wo nɔewo nu nyuie eye dometsotso nanɔ wo dome, eye nàkpɔ egbɔ be wowɔ wo pɛpɛpɛ.
Bolts kple Fasteners	De ɖoɖoa ƒe akpawo ɖekae, eye nàkpɔ egbɔ be woƒo ƒu sesĩe eye wònɔa anyi didina.
Plywood ƒe Nɔnɔmetatawo	Subɔ abe xɔmenuwo ƒe anyigba ene, si ana wòawu enu wòanɔ gbadzaa hena kɔnkrit ɖoɖo.
Ga Props kple Dropheads	Do alɔ ɖoɖoa le xɔtutuɣi, si ana woate ŋu atrɔ asi le eƒe kɔkɔme ŋu pɛpɛpɛ.
Hex Nuts kple Bolts	Na kadodo siwo le dedie eye woate ŋu atrɔ asi le wo ŋu nawɔ dɔ le kpekpea katã me.

Viɖe siwo le T-Form System ŋu

Viɖe geɖe le T-Form ɖoɖoa ŋu siwo na wòto vovo tso nɔnɔmewɔwɔmɔnu xoxowo gbɔ:

• Dɔwɔwɔ Nyuie: Alesi wowɔe le mɔ vovovowo nu la na woate ŋu aƒo wo nu ƒu kabakaba ahaɖe wo ɖa, si ɖea dɔwɔlawo ƒe ɣeyiɣi kple gazazã dzi kpɔtɔna.

• Nusiwo Wowɔna pɛpɛpɛ si nyo wu: Dometsotso kple dɔwɔnu siwo wotsɔ ɖoa ​​teƒe ɖeka zazã naa wokpɔa egbɔ be nusiwo do tso eme la sɔ pɛpɛpɛ eye womewɔa ɖeka o, si wɔnɛ be vodadawo kple gbugbɔgawɔ dzi ɖena kpɔtɔna.

• Gazazã Nyuie: To nuwo ƒe gbegblẽ kple dɔwɔlawo ƒe gaƒoƒo dzi ɖeɖe kpɔtɔ me la, T-Form ɖoɖoa naa gazazã dzi ɖena kpɔtɔna ŋutɔ wu mɔnu siwo wozãna ɖaa.

• Anɔ anyi eteƒe nadidi kple alesi woate ŋu azãe ake: Wotrɔ asi le akpa siwo le nyonyome nyuitɔ kekeake ŋu be woazãe ɣeyiɣi didi, si wɔe be ɖoɖoa nye gadede asi si anɔ anyi ɖaa na xɔtudɔwo.

• Woate ŋu azãe le mɔ vovovowo nu: T-Form ɖoɖoa sɔ na slab ƒe lolome kple ɖoɖo vovovowo, eye wòtrɔna ɖe dɔa ƒe nudidi vovovowo nu.

Afɔɖeɖe ɖesiaɖe ƒe Kpekpe ƒe Ðoɖo

Wotrɔ asi le T-Form-mɔ̃a ŋu be wòazãe bɔbɔe, eye wowɔa eƒoƒoƒu ƒe ɖoɖo si le tẽ si xɔtuha bibi ate ŋu awu enu. Afɔɖeɖe siwo le eme ƒe mama tsitotsito le ete:

1. Dɔwɔnuwo Kple Akpawo Dzadzraɖo

Hafi nàdze kpekpea gɔme la, kpɔ egbɔ be dɔwɔnu kple akpa siwo katã hiã la le ye si:

Dɔwɔnuwo	Nusiwo le eme
Asi Riveting Tu	Titina Akɔtaƒuwo
Tape Dzidzedze	Axadziƒuwo (Didi Kple Kpuie) .
Tu si Wotsɔa Ya Ʋuƒoe	Dzogoe siwo wotsɔ ƒu gbe
Spanner ƒe agbalẽ	Adzɔnuwo domedomenuwo
Rivets-wo	Bolts-wo
Aɖaka-Nuwuwu ƒe Safui	Plywood si wotsɔa lãgbalẽ wɔe
Screwdriver ƒe ʋuƒo	Steel Props ƒe Dɔwɔnuwo
Chinatɔwo ƒe Ink Line	Drophead ƒe ta
	Hex Nuts ƒe Nuwo
	Hex Bolts-ʋuwo
	Klɔƒe Gbadzawo

2. Frame la Ƒoƒu

• Dzogoe Siwo Wotsɔ Ƒu Ðe Ðoƒe: Lé axadzi akɔtaƒuawo ɖe te to dzogoe ene siwo katã wotsɔ ƒu gbe la ɖoɖo ɖe teƒea me.

• Kpekpeɖeŋunanuwo: Zã gavi kple ʋuƒo nàtsɔ abla dzogoe siwo wotsɔ ga wɔe la kple asi, eye nàkpɔ egbɔ be wosɔ ɖe wo nɔewo nu nyuie.

• Dzadzɛnyenye ƒe Dzesidede: Lé ŋku ɖe dometsotsoawo ŋu be woakpɔ egbɔ be wosɔ ɖe wo nɔewo nu, eye nàlé wo ɖe ɖoɖo nu nyuie.

• Kadodowo Kpekpe: Tsɔ elektrik-ʋukula bla gaviawo sesĩe be woatsɔ abla dzogoe siwo wotsɔ ƒu gbe kple axadziƒuwo nyuie.

Eyome, zã gaviwo nàtsɔ abla titina akɔtaƒuawo ɖe axadziƒuawo (axa didi) ŋu:

• Tsɔ dzidzenu dzidze T-form la ƒe fli eveawo siaa le axadzi be nàɖo kpe edzi be axadziƒuwo sɔ.

• Kpɔ nɔnɔmetata la ɖa be nàkpɔ egbɔ be alesi woɖoe ɖe ɖoɖo nu pɛpɛpɛ.

• Zã elektrik-ʋuƒomɔ̃ nàtsɔ abla gaviawo sesĩe, eye nàbla titina ƒe akɔtaƒuawo ɖe axadziƒuawo ŋu.

3. Plywood Panel la dede eme

• Plywood la Dada: Da plywood si nèdzra ɖo la ɖe xɔa tame, eye nàkpɔ egbɔ be yetsɔ dzogoe lãɖeɖe dɔwɔnu aɖe lã dzogoeawo xoxo.

• Panel la ƒe Dedienɔnɔ: Tsɔ panel bow clamp bla plywood la nyuie.

• Do Kuku Kple Ebla: Zã elektrik-ʋuƒomɔ̃ nàtsɔ aku do eve le ʋuƒoa me le teƒe siwo woɖo ɖi nu. De rivets do siawo me eye nàtsɔ tu si wotsɔ asi ƒonae abla wo nyuie.

Hafi nàɖe panel bow clamp la ɖa:

• Kpɔe ɖa zi eve be rivet siwo le plywood la ƒe dzogoe eneawo dzi la le te sesĩe hã.

• Ðe ʋuƒoa ƒe akɔtaɖonu la ɖa eye nàzã Chinatɔwo ƒe nuŋlɔtsi ka atsɔ ade dzesi teƒe aɖewo koŋ siwo wotso le ʋuƒoa dzi.

• Do do bubuwo ɖe atitsoga ƒe akpa siwo woɖo ɖi la dzi eye nàde rivet bubuwo eme, nàtsɔ tu si wotsɔ asi ƒonae la alé wo ɖe te.

Esia wu panel ƒe kpekpe ƒe ɖoɖoa nu.

4. T-Form System ƒe Ðoɖowɔwɔ

Alesi wowɔa xɔae la toa vovo le xɔa ƒe kɔkɔme nu.

Kpekpe si Le Meta 2 Te

• Trɔ asi le gakpoawo ƒe didime ŋu wòadidi to G-pin-awo ƒoƒo ɖe wo ŋu kple asitɔtrɔ ƒe nutunuawo ƒoƒo sesĩe me.

• Ƒo ta si le tsia dzi la nu ƒu eye nàtsɔ gakpo alo dɔwɔnu ma tɔgbe ablae sesĩe.

• Tsɔ ʋuƒoa ƒe nuwuwu si le ete la trɔ ɖe teƒe si wòle.

• Zã agbo si wotsɔ blaa gakpoawoe le gɔmedzedzea me nàtsɔ atɔ gakpoawo, nàde wo eme, atutu wo, aɖɔ wo ɖo, eye nàtu wo ɖe wo nɔƒe.

• Klã ʋuƒoa ɖe gakpo siwo wotsɔ ƒoa nui la ŋu.

• Do ŋusẽ gakpoawo kple afɔti etɔ̃ siwo wotsɔ akplɔ sesẽe be woali ke.

Be nàkpɔ egbɔ be ƒunukpeƒe siwo te ɖe wo nɔewo ŋu dome la, tsɔ foam tape xe plywood la ƒe goawo nu.

Kpekpe si Wu Meta 2

Ne èdi be yeakɔ wu meta 2 la, tsɔ ʋɔtrua ƒe xɔtunu si wotsɔa ʋɔtruti ƒe xɔtunu doa T-form panel la ɖe dzi be dɔwɔlawo nate ŋu anɔ tsitre ɖe kɔkɔƒe:

• Dɔwɔla siwo le scaffold platform la tsɔa T-form panels siwo ƒuƒoƒo bubu tsɔ vɛ le anyigba la vɛ to dɔwɔnu si wotsɔ kpena ɖe ame ŋu tsɔ tsia anyigbae dzi.

• Ðo gakpo siwo wotsɔ léa nu ɖe ​​te la ɖe teƒe si eye nàda T-form ƒe ʋuƒoawo ɖe wo tame.

• Dzra gakpo siwo wotsɔ léa nu ɖe ​​T-form ƒe ʋuƒoawo ŋu ɖo.

• Tsɔ afɔti etɔ̃ do ŋusẽ gakpoawo eye nàtsɔ akplɔ abla wo sesĩe.

Gbugbɔ wɔ ɖoɖo sia na akpa si kplɔe ɖo:

• Dzra ʋuƒoa ƒe dzogoe si wotsɔ ƒu gbe ɖo ɖe drophead la dzi kple anyigbadzi ƒuƒoƒoa ƒe kpekpeɖeŋu.

• Dzra gakpo siwo susɔ la ɖo ɖe ʋuƒoa ŋu.

Nyanuwuwuw

T-Form ɖoɖoa tsi tre ɖi na ŋgɔyiyi ɖedzesi aɖe le kɔkrit-kpewo tutu me, si naa dɔwɔwɔ nyuie, nusi sɔ pɛpɛpɛ, kple nusi nɔa anyi didina ƒe tsakatsaka. Esi wònye be eƒoa nuwo nu ƒu bɔbɔe eye wòwɔa dɔ le mɔ vovovowo nu ta la, eva zu tiatia si xɔtudɔwɔla siwo le didim be yewoawɔ yewoƒe dɔwo wòanyo wu la lɔ̃na wu. Eɖanye aƒe sue aɖe alo asitsaƒe gã aɖee nèle dɔ wɔm le o, T-Form ƒe ɖoɖoa nye nunɔamesi xɔasi aɖe si ate ŋu ado wò xɔtudɔa ɖe dzi wòaɖo kɔkɔƒe yeyewo.

Ne èdi nyatakaka bubuwo tso T-Form ɖoɖoa ŋu alo be yeabia nya tso nuƒle ŋu la, taflatse yi míaƒe nyatakakadzraɖoƒea alo te ɖe míaƒe nudzralawo ŋu. Míele mɔ kpɔm vevie be míakpe ɖe ŋuwò nàɖo wò xɔtuɖoɖowo gbɔ bɔbɔe eye nàwɔ dɔ nyuie.