Modular Formwork na Xɔ Kɔkɔwo

2. Horizontal System: Efficient 'Kabakaba Form Removal' na Anyigba Slabs / Beams

2.1 Drophead Slab Dɔwɔɖoɖo

• Steel-frame plywood panel: ŋusẽ gã gakpo frame + phenolic-mo plywood, ribbed nɔnɔme le axawo katã be woado deformation tsitretsitsi ɖe ŋgɔ 30%.

• Module siwo wozãna ɖaa: 1 2 ƒe lolome (0.36–2.16m), abe TF1812 (1800×1200mm) kple TF0606 (600×600mm), si sɔ nyuie na anyigba gbadzɛwo ƒe kadodo si mesɔ o.

• Kpekpeɖeŋu Dɔwɔɖoɖo: Ga props kple kaba-ɖea ta (SP series): Q355 ememe tube + Q235 gota tube, kɔkɔme atrɔ (2000–3500mm), kple DH01 kaba-ɖea mɔ̃ na anyigba siwo mede 5 mita o.

2.2 Tabla ƒe Nɔnɔmetata

• Enyo ŋutɔ na anyigba kɔklɔ le xɔ kɔkɔwo, dɔwɔƒe siwo nye dziƒoxɔ geɖe, kple xɔ siwo le anyigba te me. Ne wokɔe vɔ la, akpa aɖewo gazãa wo ake bɔbɔe—wokɔa wo ɖe dzisasrã kɔkɔwo dzi evɔ womeɖea wo ɖa o. Eƒe wɔwɔme le bɔbɔe, eɖeɖe le bɔbɔe, eye woate ŋu azãe ake wu xɔtunu si wozãna tsã.

2.3 Flex-Table ƒe Nɔnɔmetata

• Wotrɔ asi le eŋu be woatsɔ kɔkrit si wotsɔ kpe gbadzɛwo akɔ ɖe teƒe siwo sesẽ eye wole gbadzaa. Wotsɔa gakpo siwo wotsɔna léa nu ɖe ​​te/tripods siwo ƒe ta vovovowo doa alɔe, wozãa atikpo siwo nye H20 abe xɔtunu gbãtɔ/evelia ene, siwo wotsɔa xɔtunuwo tsyɔa wo dzi. Ewɔa dɔ na kɔkɔme siwo me kɔ va ɖo 5.90m.

2.4 ALU-Drophead Slab ƒe Nɔnɔmetata

• Nusi wotsɔ wɔe:  aluminum akɔbli xɔtunu (18kg/m²) + yameʋuɖoɖo-grade aluminum plywood.

• Nu veviwo: Ta kple aluminum xɔtunu si wotsɔ ƒo ƒui kaba, si le bɔbɔe wu gakpo ƒe xɔmenuwo 40%—si sɔ nyuie na anyigba si dzi wotu nu veviwo ɖo si kɔkɔ ŋutɔ.

• Ðaseɖigbalẽwo: Eɖo EU EN1237 ƒe dzidzenu gbɔ, dzo ƒe dzeside B-s1,d0 (vevietɔ na dzo ƒe dedienɔnɔ le mɔ̃memimɔ̃/xɔ kɔkɔwo me).  

3. Tsitrenu Ðoɖo: Nu Vovovowo Ƒe Ƒuƒoƒo Na Gli Sɔtiwo

3.1 65 Ga-Frame Gli Sɔti Formwork

• Specs: 65mm kɔkɔ gakpo xɔtunu + plywood, lolome si woate ŋu atrɔ asi le.

• Zã: Gli siwo wotu ɖe dziƒoxɔ dzi si sɔ (dzisasrã 20–50), kɔnkrit ƒe anyigba ƒe gbadzaƒe ≤2mm (mehiã be woatsɔ aŋɔ ablae o).

• Kpekpeɖeŋunuwo: Pins-siwo woɖena kabakaba (sɛkɛnd 10/afã), 3x kabakaba wu bolt xoxowo.

3.2Plastik Formwork (Sti Goglo/Sɔti Dzogoe) .

• Nusi wotsɔ wɔe: PP si wogbugbɔ trɔ, si ƒe akpa ɖeka ƒe kɔkɔme nye 1.2–3m, si woate ŋu atsɔ aƒo ƒui ɖe Φ300–Φ1200 sɔti goglowo me.

• Viɖewo: Eƒe kpekpeme le bɔbɔe (8kg/m²), mehiã be wòaɖe asi le eŋu o, ewu enu abe ahuhɔ̃e ene le eɖeɖe vɔ megbe.

• Agbenɔƒe: 50 zazã, 20% ƒe asi bɔbɔ wu ati formwork.

3.3 Timber Beam System—Gli ƒe Sɔti ƒe Nɔnɔme

• Dɔwɔɖoɖo: C24 atiwo ƒe xɔtunuwo + 18mm WBP plywood, kple akɔtaɖonu siwo woate ŋu atrɔ asi le na gli sɔti sesẽwo (le kpɔɖeŋu me, gli siwo le ŋgɔgbe, sɔti siwo ƒe akpa vovovowo trɔna).

• Nudzɔdzɔ: Yangzhou ƒe Dzɔdzɔmeŋutinunya Kple Nu yeyewo dodo ɖe ŋgɔ ƒe dɔwɔƒe si nye dziƒoxɔ 30 ƒe gli si le 45°—wotrɔ asi le eŋu to atiwo dzi, vodada le ±5mm me.

3.4 Ga Katã ƒe Sɔtiwo ƒe Nɔnɔmetata (Sti Goglo/Square) .

• Tech: Block-ƒomevi gakpo nɔnɔme + bolt ʋuʋu, min. sɔti goglo ƒe didime 300mm, max. sɔti si le dzogoe ene me 2m×2m.

• Nukpɔkpɔ: Sɔti gãwo le anyigbaxɔdzo siwo kɔkɔ ŋutɔ dzi (le kpɔɖeŋu me, sɔti si ƒe didime nye 1.8m×1.8m le Wuhan ƒe dziƒoxɔ 45-dzisasrã Hang Lung Plaza), si ƒe kpekpeme nye 150kN/m².

• Dɔwɔwɔ nyuie: Wode sɔti ɖeka le gaƒoƒo <2 me—50% kabakaba wu ati ƒe xɔmenuwo.

4. Super High-Rise System: The 'Nunyala Tolia ' na Core Tubes

4.1 Hydraulic Self-Climbing Formwork (HCB Series) ƒe Nɔnɔme Veviwo:

• Efficient & Safe: Tolili kabakaba (ŋkeke 5/anyigba ƒe mamã dedie), dɔwɔwɔ si li ke, ŋuɖoɖo ɖe tower crane ŋu boo o; dedienɔnɔ ƒe mɔxenu sesẽwo.

• Ganyawo & Nusi sɔ: Womaɖee ɖa enuenu o—woɖee ɖa le xɔtutu megbe, si na teƒe dzi ɖe kpɔtɔ eye wòɖe nusiwo bu dzi kpɔtɔ; vodada suesuesuewo, siwo woate ŋu aɖɔ ɖo bɔbɔe tso anyigba ɖesiaɖe dzi.

• Nunya ƒe Dzɔdzɔmeŋusẽ: Elektrikŋusẽ si dzi wokpɔna le tsi kɔkɔ ƒe ɖoɖo si wowɔna le nuwo wɔwɔ le wo ɖokui si ŋutɔ.

• Ƒomeviwo & Specs: - Ƒomeviwo: HCB-100 & HCB-120, le diagonal brace ƒomevi alo truss ƒomevi (composite / separate truss).

• Specs: Agba: Dziƒo nuƒolanɔƒe ≤0.75kN / ㎡, bubuwo ≤1kN / ㎡.Hydraulics: Cylinder ʋuʋu 300mm, pɔmpi sisi * n × 2L / miniti (n = pɔmpiwo), duƒuƒu ~ 300mm / miniti.

• Ŋutete: Woɖo dzidzenu 1000kN & 1200kN.

• Sync: Vodada eve-cylinder ≤20mm.  

5. Lianggong ƒe Nyonyome Kple Subɔsubɔdɔ: Tso Adzɔnuwo Dzi Va ɖo Agbenɔƒewo ƒe Kpekpeɖeŋu Blibo Dzi

5.1 Dzesidede: Asrafowo ƒe Dzesidede ƒe Dzidzenuwo

• Nusiwo wotsɔ wɔe : Ga si wozãna ɖaa (10% ƒe kutsetse ƒe ŋusẽ si lolo wu) + United States APA-ɖaseɖigbalẽ (E-1 tsi mate ŋu) plywood.

• Dodokpɔ: Ame etɔ̃lia ƒe dodokpɔwo (le kpɔɖeŋu me, SGS) kpɔa egbɔ be 12+ ƒe dzesiwo (afã ƒe nyaƒoɖeamenu, deflection) wu dɔwɔƒea ƒe dzidzenuwo 15%.

• Nya: Indonesia ƒe Jakarta-Bandung Ketekemɔ si zɔa du sesĩe ƒe xɔ siwo nye dziƒoxɔ 20—siwo me tsi dzana le teƒe xɔdzowo, wometrɔna o/si metso o.

5.2 Subɔsubɔdɔ: Agbenɔƒewo ƒe Kpekpeɖeŋu Blibo

• Do ŋgɔ na edzadzra: BIM ƒe wɔwɔme femaxee (3 egbɔkpɔnuwo), le kpɔɖeŋu me, Yancheng ƒe dzisasrã 38 ƒe dzesi—si wokpɔ do ŋgɔ 200+ node collisions.

• I n-dzadzra: 24/7 le teƒea mɔ̃ɖaŋudɔwɔlawo.  

• Nudzadzra vɔ megbe: Dɔwɔla siwo tsɔ wo ɖokui na kpɔa nya siwo le teƒea gbɔ enumake.  

6. Nyataƒoƒo: Xɔ Kɔkɔwo ƒe Dɔwɔnu si Wozãna—Ewɔa Dɔ Nyuie, Ewɔa Nunya, Ewɔa Dɔ Nyuie

• Lianggong ƒe ɖoɖo 4 kple nu 12 siwo wowɔ la xɔa xɔ kɔkɔwo tutu ƒe akpawo katã. Eɖanye hadrolik self-climbing 'dziŋgɔli xɔtula' na core tubes alo kaba-gbã kplɔ̃ formwork na standard anyigba, egbugbɔ ɖe xɔtutu gɔme kple dɔwɔƒewo ƒe susu.

• Le ƒe 2024 me la, Lianggong ƒe dɔwo ɖe ɣeyiɣi dzi kpɔtɔ 22% eye woɖe dɔwɔlawo ƒe gazazã dzi kpɔtɔ 35%, si na China ƒe xɔtutu ɖo ta 'taɖodzinu siwo kɔ wu, kabakaba wu, siwo me nunya le wu' gbɔ.