Lianggong Manufacturing Reusable H20 Timber Beam Formwork for Concrete Construction of Walls, Columns, and Slabs

H20 Timber Beam Formwork System

Steel walers, plywood, H20 timber beams, and hoisting hooks comprise the H20 timber beam formwork system. A flange clamp is utilized to join the steel walers and timber beams, while two hooks are symmetrically situated on each side of the timber beam. The timber beam is assembled on-site utilizing universal accessories, thereby facilitating disassembly and reassembly processes.

1. It is portable and lightweight, which facilitates construction and transportation.

2. Composed of plywood, the formwork panel features a flat surface that facilitates airflow and water absorption.

3. The surface of the concrete is stain-free, aesthetically pleasing, of high quality, and has a high turnover rate.

Implementing Flange Clamps:

1. The process of installing flange bolts onto the side beams:

The inner side is where the flange clamps for the two timber beams at the edge are affixed. They are incapable of being joined to the steel walers in any other way.

2. Fitting flange clamps to the beams that are equipped with raising hooks:

The lifting hook-equipped flange fasteners of timber beams must be parallel-mounted on both sides of the beams.

3. Flange clamp assembly for the remaining timber beams:

As illustrated, flange clamps ought to be sequentially installed on the left and right sides of the timber joists. Four flange clamps are typically required to secure a single beam.