Nukae nye PVC-mɔ̃ si wotsɔna ƒoa xɔmenuwoe?

I. Ŋgɔdonya

 

PVC-mɔ̃, si wogayɔna be PVC-plastik-mɔ̃, le tɔtrɔ gã aɖe wɔm le xɔtudɔwɔƒea to eƒe mɔnu yeye si wòzãna tsɔ ƒua kɔkrit me. Wotrɔ asi le egbegbe xɔtunu sia ŋu be wòatrɔ asi le kɔkrit xɔtunuwo ŋu le wo kɔklɔ kple wo yɔyɔ me, si ana woate ŋu azã xɔtunu xoxo siwo nɔa anyi didina eye womexɔa ga geɖe o ɖe xɔtunu xoxowo teƒe.

 

Polyvinyl Chloride (PVC), si nye aŋetu si wotsɔa aŋe wɔe si woate ŋu azã le mɔ vovovowo nu koŋue wotsɔ wɔa PVC-mɔ̃. Exɔ ŋkɔ le ƒe ʋɛ siwo va yi me le ŋutete si le esi be wòana xɔtudɔwo nanɔ bɔbɔe, aɖe dɔwɔlawo kple nuwo ƒe gazazã dzi akpɔtɔ, eye wòana dɔa ƒe dɔwɔwɔ nanyo ɖe edzi ta. Esi míele nu me kum le PVC ƒe xɔtuɖaŋu ƒe xexeame ŋu la, míadzro eƒe wɔwɔme, eƒe nɔnɔmewo, viɖe siwo le eŋu, kple eƒe zazã le egbegbe xɔtuɖoɖowo me me.

 

II. Nusiwo Wowɔ Kple Wo Wɔwɔ

 

A. Nusiwo Wozãna

 

PVC ƒe aŋɔ koŋue wotsɔ wɔa PVC-mɔ̃a, si naa xɔtunua ƒe wɔwɔme vevitɔ kple eƒe nɔnɔmewo. Gake wotsɔa nu vovovo siwo wotsɔ kpe ɖe eŋu kple nusiwo nana wòli ke kpena ɖe xɔtunua ƒe dɔwɔwɔ ŋu:

 

1. PVC Resin: Nu vevitɔ si wotsɔ wɔa nuɖuɖui, si wokpɔna tso vinyl chloride monomers ƒe polymerization me.

2. Nusiwo naa nu li ke: Wotsɔa wo kpena ɖe eŋu be wòakpɔ PVC-mɔ̃a ta tso dzoxɔxɔ, kekeli, kple nutome ƒe nu bubuwo ƒe gbegblẽ me.

3. Trɔtrɔnuwo kple Nusiwo Wotsɔ Kpe Ðe Eŋu: Wotsɔe kpe ɖe eŋu be woatsɔ ado nɔnɔme tɔxɛwo abe dzo ƒe tsitretsitsi, ƒoƒo ƒe ŋusẽ, kple UV ƒe tsitretsitsi ene ɖe ŋgɔ.

 

B. Adzɔnuwo wɔwɔ ƒe Dɔwɔna

 

PVC-mɔ̃ ƒe wɔwɔme lɔ afɔɖeɖe vevi geɖe ɖe eme:

 

1. Compound Mixing: Wotsɔa PVC resin tsakana kple plasticizers, stabilizers, kple nu bubu siwo wotsɔ kpena ɖe eŋu le agbɔsɔsɔ tɔxɛ aɖe me. Wodoa dzo na tsakatsaka sia eye wotsakanɛ be wòawɔ nusi sɔ.

 

.

 

3. Fafa kple Nɔnɔmewɔwɔ: Le wɔwɔme megbe la, wofa PVC nu la kabakaba eye wowɔa eƒe nɔnɔme ɖe nɔnɔme si wodi nu.

 

4. Lãɖeɖe kple eƒe nyonyome dzi kpɔkpɔ: Wolãa PVC nusi wowɔ la ɖe didime kple nɔnɔme siwo sɔ me. Wowɔa afɔɖeɖe sesẽwo tsɔ kpɔa nyonyome dzi be woakpɔ egbɔ be xɔtunua ɖo dzidzenu siwo hiã gbɔ.

 

III. PVC Formwork ƒe nɔnɔmewo

 

A. Dzɔdzɔmeŋusẽ ƒe Nɔnɔmewo

 

1. Dzɔdzɔme si me kpekpeme mele o: PVC-mɔ̃wo ƒe kpekpeme le bɔbɔe ŋutɔ wu xɔtunu siwo wozãna tsã, si wɔnɛ be eŋudɔwɔwɔ kple etsɔtsɔ yi teƒeteƒewo le bɔbɔe.

 

2. Nusiwo nɔa anyi didina kple ŋusẽ: Togbɔ be eƒe kpekpeme le bɔbɔe hã la, PVC-mɔ̃a ɖea eƒe anyinɔnɔ kple ŋusẽ nyui aɖe fiana. Ate ŋu anɔ te ɖe eŋudɔwɔwɔ zi geɖe nu evɔ magblẽ o, zi geɖe la, enɔa anyi zi 50 alo esi wu nenema zazã le atixɔwo me eye wòxɔa ga geɖe wu gɔ̃ hã le ga xɔtuɖaŋu deŋgɔwo me.

 

3. Smooth Surface Finish: Ahuhɔ̃e ƒe anyigba ƒe mɔ̃ɖaŋununya si ŋu woɖe mɔ ɖo la kpɔa egbɔ be anyigba le gbadzaa ɣesiaɣi, le eŋudɔwɔwɔ zi geɖe megbe gɔ̃ hã. Esia wɔnɛ be wowɔa kɔkrit si ƒe nyonyome deŋgɔ si mehiã be woawɔ atike bubu aɖeke ɖe eŋu zi geɖe o.

 

B. Atikewo ƒe Nɔnɔmewo

 

1. Tsitretsitsi ɖe Atikewo Kple Alkaliwo Ŋu: PVC-mɔ̃wo ɖea tsitretsitsi ɖe atike kple alkali vovovo siwo wodoa goe zi geɖe le xɔtuƒewo ŋu fiana, si wɔnɛ be wònɔa agbe didi.

 

2. Tsi kple Moistureproof: Esi wowɔe bliboe tso plastic, PVC formwork nye 100% tsi. Nɔnɔme sia wɔnɛ be woate ŋu atsɔe ade tsidzadza me alo adzrae ɖo ɖe gota evɔ mehiã be woatsɔ nutsyɔnu si akpɔ eta o.

 

C. Dzoxɔxɔ ƒe Nɔnɔmewo

 

1. Dzoxɔxɔ ƒe Tsitretsitsi ƒe Agbɔsɔsɔ: PVC-mɔ̃a léa eƒe blibonyenye me ɖe asi le dzoxɔxɔ ƒe didime geɖe me, tso -40°C va ɖo +75°C. Formwork deŋgɔ aɖewo te ŋu nɔa te ɖe dzoxɔxɔ si ade +200°C gɔ̃ hã nu.

 

2. Non-deformity Under Extreme Temperatures: To vovo na blema nu aɖewo la, PVC formwork metsina, medona, alo megbãna le dzoxɔxɔ si gbɔ eme ƒe nɔnɔmewo me o, si léa eƒe nɔnɔme kple dɔwɔwɔ me ɖe asi.

 

IV. PVC Formwork ƒe Viɖewo

 

Viɖe gbogbo aɖewo le PVC-mɔ̃ si wotsɔ wɔa xɔtunuwoe ŋu siwo na wòva le amewo lɔ̃m vevie le xɔtudɔwɔƒewo:

 

1. Gbugbɔgazã kple Gazazã nyuie: Viɖe vevi siwo le PVC ƒe xɔmenuwo ŋu dometɔ ɖekae nye ŋutete si le esi be woagazãe zi geɖe. Le ati bɔbɔewo me la, woate ŋu azãe ake zi gbɔ zi 50 alo esi wu nenema, eye woate ŋu azãe wu nenema gɔ̃ hã le ga xɔtuɖaŋu deŋgɔwo me. Nu sia si woate ŋu azã ake si lolo la ɖea gazazã dzi kpɔtɔna ŋutɔ le ɣeyiɣi aɖe megbe.

 

. Alesi zazã le bɔbɔe alea nana be xɔtutu ƒe ɣeyiɣiwo nɔa kabakaba wu eye wòɖea dɔwɔlawo ƒe hiahiã dzi kpɔtɔna.

 

.

 

4. Mehiã be Woaɖe Ami Aɖe O: To vovo na ami si wotsɔna ƒoa ami si wozãna tsã la, PVC ami mehiã be woatsɔ ami si ɖea asi le eŋu la asisi hafi akɔ kɔkrit o. Esia naa ɣeyiɣi dzi ɖena kpɔtɔna eye wòɖea nuwo ƒe gazazã dzi kpɔtɔna.

 

5. Viɖe siwo le nutome ŋu: Woate ŋu agbugbɔ PVC-mɔ̃wo awɔ dɔe, si wɔnɛ be gbeɖuɖɔ siwo dona le xɔtudɔwo me dzi ɖena kpɔtɔna. Eƒe agbenɔƒe didi hã fia be womegaɖɔliae enuenu o, si ɖea ŋusẽ si wògblẽna le nutome ŋu dzi kpɔtɔna ɖe edzi.

 

6. Nusiwo woate ŋu azã le mɔ vovovowo nu: Woate ŋu azã PVC-mɔ̃wo le xɔtudɔ vovovowo me, tso xɔ siwo me amewo anɔ dzi va ɖo xɔtuɖoɖo gãwo dzi.

 

7. Kɔkrit ƒe Nuwuwu ƒe Nyonyome si nɔa anyi ɖaa: PVC-mɔ̃ ƒe akpa si le gbadzaa la wɔnɛ be wotsɔa kɔkrit ƒe nuwuwu deŋgɔ, si wɔnɛ be zi geɖe la, mehiã be woawɔ dɔ bubuwo ɖe anyigba o.

 

V. Nusiwo gblẽ le PVC Formwork ŋu

 

Togbɔ be viɖe geɖe le PVC-mɔ̃a ŋu hã la, ele vevie be nàbu eƒe seɖoƒewo ŋu:

 

1. Nutome Ŋuti Nyawo: PVC wɔwɔ kple etsɔtsɔ ƒu gbe ate ŋu ahe nutome ƒe dzitsitsi vɛ le atike siwo ate ŋu agblẽ nu le ame ŋu ƒe dodo ta. Nuwo gbugbɔgazã kple wo tsɔtsɔ ƒu gbe ƒe mɔnu nyuiwo le vevie ŋutɔ.

 

.

 

3. Gadede Gɔmedzedze ƒe Gadede Asi Si Gãna: Togbɔ be ga geɖe le eme le ɣeyiɣi didi aɖe megbe hã la, zi geɖe la, PVC-mɔ̃ɖaŋu bia be woade ga geɖe do ŋgɔ ne wotsɔe sɔ kple aŋetu-nu aɖewo siwo wozãna tsã.

 

4. Dzadzraɖo ƒe Nudidiwo: Be woakpɔ egbɔ be PVC-mɔ̃a nanɔ anyi didi eye wòalé dɔwɔwɔ me ɖe asi la, ebia be woakɔ eŋu edziedzi ahadzrae ɖo nyuie, si ate ŋu ana ga si woatsɔ adzrae ɖo ɖe edzi.

 

5. Dzoxɔxɔ ƒe Seselelãme: Togbɔ be woate ŋu anɔ te ɖe dzoxɔxɔ ƒe didime vovovowo nu hã la, nɔnɔme sesẽwo ate ŋu akpɔ ŋusẽ ɖe PVC-mɔ̃a ƒe dɔwɔwɔ dzi, si abia be woabu eŋu nyuie le yame ƒe nɔnɔme aɖewo me.

 

VI. Nusiwo Wogblɔna Kple Wo Ƒomeviwo

 

PVC formwork va le nɔnɔme vovovowo me be wòasɔ ɖe xɔtuɖaŋu vovovowo nu:

 

A. Standard Dimensions kple Customization Tiatiawɔblɔɖewo

 

Woate ŋu akpɔ PVC-mɔ̃ si ƒe lolome le vovovo, si sɔ kple plywood-mɔ̃:

- Kekeme: Va ɖo 1300 mm (zi geɖe la, va ɖo 1250 mm alo 49.25')

- Didime: Seɖoƒe ŋutɔŋutɔ aɖeke meli o, kple didime siwo bɔ siwo sɔ kple plywood gbadzɛwo (le kpɔɖeŋu me, 2440 mm alo 96')

- Agbɔsɔsɔ xɔŋkɔwo dometɔ aɖewoe nye 4' x 8' panels

 

Tiatia siwo woawɔ ɖe ɖoɖo nu li be woawɔ ɖe dɔa ƒe nudidi tɔxɛwo dzi.

 

B. Titrime ƒe Vovototowo

 

Zi geɖe la, titrime ƒe tiatia tso 6mm va ɖo 22mm, eye esiwo bɔ wue nye:

- 12mm (1/2 ') ƒe didime.

- 15mm (5/8 ') ƒe didime.

- 18mm (3/4 ') ƒe didime.

 

C. Density ƒe didime

 

Zi geɖe la, ʋeʋẽ si woɖo ɖi la nyea 0.70g/cm3 ± 0.5%, gake woateŋu atrɔ asi le eŋu le 0.60 va ɖo 0.90 g/cm3 ƒe domedome be wòasɔ ɖe dɔwɔwɔ vovovowo nu.

 

D. Amadede ƒe Tiatiawɔblɔɖe

 

Togbɔ be zi geɖe la, amadede gbãtɔa nyea turquoise green alo azure blue hã la, woate ŋu atrɔ asi le amadede bubuwo ŋu, siwo dometɔ aɖewoe nye ɣi, yibɔ, kple dzĩ.

 

E. PVC Formwork ƒomeviwo

 

PVC-mɔ̃ ƒomevi vovovowo li na xɔtunu vovovowo:

1. Gli ƒe nɔnɔmewɔwɔ

2. Slab ƒe nɔnɔmetata

3. Sɔti ƒe nɔnɔmetata (si me sɔti siwo woate ŋu atrɔ asi le kple esiwo le goglo ƒe tiatia hã le) .

4. Beam ƒe xɔmenuwo ƒe wɔwɔme

 

VII. PVC Formwork ƒe dɔwɔwɔ

 

PVC formwork kpɔa dɔwɔwɔ le mɔ vovovowo nu le xɔtudɔ vovovowo me:

 

A. Aƒewo Tutu

 

Le aƒewo ƒe dɔwo me la, wozãa PVC ƒe xɔmenuwo na:

- Gɔmeɖoanyi gliwo

- Gli siwo le eme kple egodo

- Slabs kple anyigba

- Atrakpuiwo

 

B. Asitsaxɔwo

 

Asitsatsa ƒe dɔbiagbalẽviwo dometɔ aɖewoe nye:

- Xɔ kɔkɔwo

- Ɔfisxɔwo

- Asitsaƒe gãwo

- Sukudede dɔwɔƒewo

 

C. Dɔwɔƒewo ƒe Dɔwɔɖoɖowo

 

Wozãa PVC formwork le dɔwɔƒewo ƒe xɔtutu me na:

- Nudzraɖoƒewo

- Dɔwɔƒewo

- Nudzraɖoƒewo

 

D. Dɔwɔƒewo ƒe Dɔwɔnawo

 

Xɔtuɖaŋudɔ gãwo ɖea vi tso PVC ƒe xɔtuɖoɖowo me le:

- Tɔdzisasrã tutu (le kpɔɖeŋu me, abutments, piers) .

- Mɔdodo ƒe ʋuƒo

- Mɔdodowo kple mɔdodo gãwo ƒe xɔtuɖoɖowo

 

E. Dɔwɔwɔ Tɔxɛwo

 

PVC formwork ƒe asitɔtrɔ le nɔnɔmewo ŋu na be:

- Xɔtuɖoɖo siwo woƒo xlãe

- Atsyɔ̃ɖoɖo ƒe kɔnkrit ƒe akpawo

- Nuto didiƒe tutu siwo me mɔ̃wo ƒe gege ɖe eme seɖoƒe li na

 

VIII. Ne wotsɔe sɔ kple Nusiwo Wotsɔna Wɔna le Dekɔnu Me

 

A. PVC kple Plywood ƒe Nɔnɔmewɔwɔ

 

Viɖe siwo le PVC ŋu wu plywood:

- Agbenɔƒe didi wu (50+ zazã ne wotsɔe sɔ kple 5-10 na plywood)

- Tsi mate ŋu age ɖe eme o eye wònɔa anyi didina wu

- Anyigba ƒe nyonyome si mewɔa tɔtrɔ o le zazã geɖe me

- Mehiã be woaɖe asi le dɔwɔlawo ŋu o

 

Nusiwo gblẽ le eŋu:

- Ga si wozãna le gɔmedzedzea me si lolo wu

- Nusiwo ate ŋu atsi dzi ɖe nutome ŋu le PVC wɔwɔ me

 

B. PVC vs. Ga ƒe Nɔnɔmewɔwɔ

 

Viɖe siwo le PVC ŋu wu gakpo:

- Kpekpeme si le bɔbɔe wu, eŋudɔwɔwɔ le bɔbɔe wu

- Ga si wozãna le gɔmedzedzea me dzi ɖe kpɔtɔ

- Afɔku aɖeke mele gbeɖuɖɔ alo xɔxlɔ̃ me o

 

Nusiwo gblẽ le eŋu:

- Agbatsɔtsɔ ƒe ŋutete si bɔbɔ ɖe anyi

- Ðewohĩ masɔ na dɔ sesẽ aɖewo o

 

C. PVC kple Aluminium Formwork

 

Viɖe siwo le PVC ŋu wu aluminum:

- Zi geɖe la, gazazã si bɔbɔ wu

- Ele bɔbɔe be woatsoe ahatrɔ asi le eŋu le teƒea

 

Nusiwo gblẽ le eŋu:

- Ðewohĩ masẽ abe alesi wòle le dɔ aɖewo wɔwɔ me ene o

- Agbenɔƒe si ate ŋu anɔ kpuie wu le zazã sesẽ ŋutɔ ƒe nɔnɔmewo me

 

IX. Mɔfiame Siwo Ku Ðe Eɖoɖo Kple Ezazã Ŋu

 

A. Nuwo Ŋudɔwɔwɔ Kple Nudzraɖoƒe Nyuitɔ

 

- Dzra PVC formwork panels ɖo gbadzaa be woagatrɔ o

- Te ɖa tso ɣe ƒe keklẽ tẽ gbɔ ne mèle ezãm o

- Kpɔ asi le eŋu nyuie be nàƒo asa na nusiwo agblẽ, vevietɔ le goawo kple dzogoewo dzi

 

B. Mɔnu Siwo Wozãna tsɔ Dea Nuwoe

 

- Wɔ ɖe adzɔnuwɔƒea ƒe mɔfiamewo dzi hena kpekpea

- Kpɔ egbɔ be wowɔ ɖeka nyuie eye wodo alɔe

- Zã nusiwo wotsɔ blaa nu kple nusiwo wotsɔ blaa nu siwo sɔ

 

C. Nuwo Ðeɖe Kple Wo Dzadzɛnyenye ƒe Dɔwɔnawo

 

- Ðe formwork ɖa nyuie be nàgagblẽ nu le kɔnkrit ƒe anyigba ŋu o

- Klɔe enumake ne èzãe vɔ kple tsi kple mop

- Ƒo asa na atike sesẽwo alo abrasive cleaning methods zazã

 

D. Dzadzraɖo Kple Dzadzraɖo

 

- Kpɔe ɖa edziedzi be nusiwo gblẽ hã

- Zi geɖe la, woate ŋu atsɔ ya dzodzoe ƒe tu si ƒe nyaƒoɖeamenu sue aɖe adzra nu suesuesue siwo gblẽ la ɖo

- Trɔ panels ne womegaɖo nyonyome ƒe dzidzenuwo gbɔ o

 

X. Nudzɔdzɔwo Ŋuti Numekuku Kple Xexeame Ŋutɔŋutɔ ƒe Kpɔɖeŋuwo

 

A. Xɔ Kɔkɔwo Xɔtudɔwo

 

Nudzɔdzɔa Ŋuti Numekuku: Le xɔ kɔkɔ aɖe si wotu ɖe dziƒoxɔ 30 dzi me la, wozã PVC-mɔ̃ tsɔ tsɔ kɔkrit gliwo kple sɔtiwo ƒu gbe. PVC-mɔ̃ ƒe kpekpeme si le bɔbɔe na be woate ŋu atsɔe kple eɖoɖo bɔbɔe, si wɔe be woɖe dɔwɔlawo dzi kpɔtɔ abe 30% ene ne wotsɔe sɔ kple xɔtuɖaŋumɔnu xoxowo. PVC-kpaawo gbugbɔgazã ɖe dzisasrã geɖe dzi na be woɖe ga si wozãna ɖe xɔtunuawo katã ŋu dzi kpɔtɔ 25% na dɔa.

 

B. Asitsaƒe ƒe Xɔtuɖaŋu Sesẽwo

 

Kpɔɖeŋu: Asitsaƒe gã aɖe tutu zã PVC-mɔ̃ hena eƒe ƒoƒoƒu kple eɖeɖe kabakaba ƒe ŋutete. Dɔwɔwɔ nyuie sia ɖe xɔtuɣia dzi kpɔtɔ kwasiɖa 3 ne wotsɔe sɔ kple ɖoɖowɔɖi gbãtɔ, si wɔe be woate ŋu aʋui do ŋgɔ eye woakpɔ ga.

 

C. Dɔwɔƒewo ƒe Dɔwɔɖoɖowo ƒe Dɔwɔwɔwo

 

Nudzɔdzɔa Ŋuti Numekuku: Le tɔdzisasrã tutudɔ aɖe me la, wozã PVC-mɔ̃ tsɔ wɔ tɔdzisasrãa ƒe afɔtiwo. Alesi wòte ŋu nɔa te ɖe xɔxlɔ̃ nu kple ŋutete si le esi be wòanɔ te ɖe nusiwo le eme nu na wòsɔ nyuie na dɔ sia wɔwɔ. Alesi wogate ŋu zãa xɔtunua le tɔdzisasrã ƒe akpa vovovowo dzi la na woɖe gazazã dzi kpɔtɔ 20% le xɔtunua ƒe nuzazãwo kple dɔwɔlawo me.

 

XI. Nutome Ŋuti Nukpɔsusuwo

 

A. PVC Formwork ƒe gbugbɔgazã

 

PVC formwork nye 100% recyclable le eƒe viɖe ƒe agbenɔƒe ƒe nuwuwu. Woate ŋu adzra aŋetu siwo wozã na aŋenuwo gbugbɔgazãna dɔwɔƒewo, eye zi geɖe la, woxɔa asi si lolo wu plywood xɔtunu siwo wozã.

 

B. Ŋusẽzazã le Nuwɔwɔ Kple Ʋuɖoɖo Me

 

Alesi PVC-mɔ̃a ƒe kpekpeme le bɔbɔe la wɔnɛ be ʋuɖoɖo ƒe gazazãwo dzi ɖena kpɔtɔna eye ami zazã dzi ɖena kpɔtɔna ne wotsɔe sɔ kple nusiwo wozãna tsã siwo kpekpe wu.

 

C. Avewo Tsɔtsrɔ̃ Dzi Ðeɖe Akpɔtɔ

 

To PVC-mɔ̃ si nɔa anyi didina ɖe plywood teƒe nana me la, ewɔa akpa aɖe le atiwo ƒe didi dzi ɖeɖe kpɔtɔ me, si doa alɔ avewo takpɔkpɔ ƒe agbagbadzedzewo le mɔ si mele tẽ o nu.

 

D. Nusiwo Wotsɔ ƒua gbe Kple Wo Gbugbɔgazã ƒe Mɔnu Nyuiwo

 

Be woakpɔ viɖe geɖe wu le nutome ŋu la:

- Woaɖo hadomeɖoɖowo kple nutoa me nuwo gbugbɔgazã ƒe dɔwɔƒewo

- Woawɔ xɔtunu siwo wozã ƒe vovototodedeameme le teƒea

- Woafia nu dɔwɔlawo tso alesi woawɔ nu ɖe ​​wo ŋu nyuie kple alesi woatsɔ wo aƒu gbe ŋu

 

XII. Alesi Nàtia PVC Formwork Ahatsɔe Asɔ Kple Wo Nɔewo

 

A. Nu Vevi Siwo Ŋu Nàbu Ne èle PVC Formwork Tiam

 

1. Kpekpeme Kple Kpekpeme: Zi geɖe la, kpekpeme si lolo wu fia be eƒe nyonyome nyo wu gake ate ŋu akpɔ ŋusẽ ɖe eŋudɔwɔwɔ bɔbɔe dzi.

2. Raw Material Quality: 100% yeye PVC nu nyo wu nusiwo wogbugbɔ zã hena dɔwɔwɔ nyuie wu.

.

4. UV Tsitretsitsi: Ele vevie na gota zazã kple edzadzraɖo.

5. Nail kple Screw Holding Strength: Vevietɔ na kpekpe kple zazã geɖe.

 

B. Nusiwo Wokpɔna ƒe Vevienyenye

 

PVC nu yeye 100% zazã, si to vovo na nusiwo wogbugbɔ zã, kpɔa egbɔ be:

- Nɔnɔme si li ke le batchwo katã me

- UV ƒe tsitretsitsi nyuie wu, vevietɔ le nuto siwo me wokpɔa nu geɖe le me

- Tenacity kple rigidity si de ŋgɔ wu

 

C. Adzɔnuwɔƒe ƒe Nyawo Me Dzodzro

 

Ne èle adzɔnuwɔƒea ƒe nyawo me dzrom la, bu:

- Gbugbɔgazã ƒe tsatsamwo: Kpɔe ɖa to dodokpɔ si wowɔ le wo ɖokui si alo asisiwo ƒe ɖaseɖiɖiwo me

- Surface finish quality: Bia kpɔɖeŋuwo alo yi dɔ siwo wowu enu gbɔ

- Nutome ƒe ɖaseɖigbalẽwo: Di dɔwɔƒewo ƒe dzidzenu siwo dzi woda asi ɖo

 

D. Gazazã Ŋuti Nukpɔsusuwo

 

- Da asɔ le gadede gbãtɔ me kple ga si wodzra ɖo ɣeyiɣi didi tso gazazã zi geɖe me

- Factor le dɔwɔlawo ƒe gazazã dzi ɖeɖe kpɔtɔ si ate ŋu adzɔ tso eŋudɔwɔwɔ bɔbɔe me

- Bu beléle na wo kple wo ɖɔliɖɔli ƒe gazazãwo ŋu le dɔa ƒe agbenɔɣi

 

E. Dodokpɔ kple Nyonyome ƒe Kakaɖedzi

 

Nɔnɔme vevi siwo wòle be woado kpɔ dometɔ aɖewoe nye:

- Ŋusẽkpɔɖeamedzi ƒe tsitretsitsi

- Flexural ŋusẽ

- UV ƒe liƒo

- Atikewo ƒe tsitretsitsi

 

Di adzɔnuwɔƒe siwo wɔna ɖe dukɔwo dome nyonyome ƒe dzidzenuwo dzi eye wonaa dodokpɔ me tsonu siwo me kɔ.

 

XIII. Nyanuwuwuw

 

PVC-mɔ̃wo tsi tre ɖi na ŋgɔyiyi ɖedzesi aɖe le xɔtuɖaŋu me, si naa nusiwo nɔa anyi didina, gazazã nyuie, kple zazã bɔbɔe ƒe tsakatsaka. Ŋutete si le esi be woagazãe zi geɖe, tsɔ kpe ɖe eƒe kpekpeme si le bɔbɔe kple eƒe anyigba ƒe akpa si mewɔa tɔtrɔ o ŋu la na wònye tiatia si hea ame na xɔtudɔ vovovowo.

 

Togbɔ be PVC-mɔ̃ɖaŋununya hea kuxi aɖewo vɛ, vevietɔ le nutome ŋu bubu kple gazazã gbãtɔ gome hã la, zi geɖe la, eƒe viɖewo sɔa gbɔ wu nusiwo ŋu wotsi dzi ɖo siawo le dɔ geɖe wɔwɔ me. Nu vevitɔ si ana PVC-mɔ̃ ƒe viɖewo nadzi ɖe edzi wue nye be woatiae nyuie, woazãe, eye woalé be na wo nyuie.

 

Esi xɔtudɔwɔƒea yi edzi le ŋgɔ yim, esi wole gbe tem ɖe dɔwɔwɔ nyuie, gazazã nyuie, kple nutome ƒe agbanɔamedzi dzi geɖe wu ta la, PVC ƒe xɔtuɖaŋuwo le nɔnɔme nyui me be wòawɔ akpa vevi aɖe. Ne xɔtudɔwɔlawo se eƒe nɔnɔmewo, wo zazã, kple wo zazã ƒe mɔnu nyuitɔwo gɔme la, woate ŋu awɔ PVC ƒe nɔnɔmetatawo ŋudɔ atsɔ ana dɔa me tsonu nanyo ɖe edzi eye woawɔ akpa aɖe le xɔtumɔnu siwo li tegbee wu me.

 

PVC ƒe xɔtuɖaŋu ƒe etsɔme le xɔtudɔwɔƒewo dze abe ɖe ŋugbedodo le eme ene, eye numekuku kple ŋgɔyiyi siwo yi edzi ate ŋu akpɔ seɖoƒe siwo li fifia gbɔ eye wòana eƒe dɔwɔwɔ kple nutome ƒe nɔnɔme nanyo ɖe edzi wu. Abe alesi wòle le xɔtunu ɖesiaɖe gome ene la, PVC-mɔ̃ ƒe dzidzedzekpɔkpɔ nɔ te ɖe eŋudɔwɔwɔ nyuie kple eŋutinunyala siwo zãnɛ ƒe nunya dzi mlɔeba.

 

 

XIV. Nya Siwo Wobiana Enuenu (FAQ) .

 

Q1: Ɣeyiɣi didi kae PVC-mɔ̃ ate ŋu anɔ anyi?

A: Zi geɖe la, woate ŋu agazã PVC-mɔ̃ nyuiwo zi gbɔ zi 50 alo esi wu nenema le atixɔwo me, eye woate ŋu azãe wu nenema gɔ̃ hã le ga xɔtuɖaŋu nyuitɔwo me. Ne wokpɔ edzi nyuie hedzrae ɖo nyuie la, ate ŋu anɔ anyi ƒe geɖe le xɔtudɔ geɖewo me.

 

Q2: Ðe PVC formwork mewɔa nuvevi nutome oa?

A: Togbɔ be PVC wɔwɔ fɔa nutome ƒe dzitsitsi aɖewo ɖe te hã la, PVC ƒe xɔmenuwo nye esiwo woate ŋu azã ake 100% eye eƒe agbenɔƒe didi ɖea gbeɖuɖɔ dzi kpɔtɔna ne wotsɔe sɔ kple xɔtunu xoxowo. Ezazã ate ŋu ana avewo tsɔtsrɔ̃ hã dzi naɖe akpɔtɔ to mɔnu bubu si woatsɔ awɔ atiwo teƒe nana me.

 

Q3: Aleke PVC ƒe xɔmenuwo ƒe asi sɔ kple nusiwo wozãna tsã?

A: Zi geɖe la, PVC formwork ƒe asi bɔbɔna le gɔmedzedzea me ne wotsɔe sɔ kple nuwo abe plywood ene. Gake zi geɖe la, ŋutete si le esi be woagazãe zi geɖe la wɔnɛ be woɖea gazazã dzi kpɔtɔna ŋutɔ le ɣeyiɣi didi me, vevietɔ le dɔ gãwo alo dɔ geɖe wɔwɔ me.

 

Q4: Ðe woate ŋu azã PVC formwork le yame ƒe nɔnɔmewo katã mea?

A: PVC formwork te ŋu nɔa te ɖe yame ƒe nɔnɔme vovovowo nu ŋutɔ. Ate ŋu anɔ te ɖe dzoxɔxɔ si tso -40°C va ɖo +75°C nu evɔ metrɔna o. Gake nɔnɔme sesẽwo ate ŋu akpɔ ŋusẽ ɖe eƒe dɔwɔwɔ dzi, eyata ele vevie be nàwɔ ɖe adzɔnuwɔƒea ƒe mɔfiamewo dzi le yame ƒe nɔnɔme tɔxɛwo ŋu bubu me.

 

Q5: Ðe PVC formwork bia aɖaŋu tɔxɛwo hafi woate ŋu ade emea?

A: Zi geɖe la, PVC-mɔ̃a ƒe dɔwɔwɔ kple eɖoɖo le bɔbɔe wu nusiwo wozãna tsã siwo kpekpe wu le eƒe kpekpeme si le bɔbɔe ta. Togbɔ be mehiã aɖaŋu tɔxɛ aɖeke kura o hã la, hehenana nyuie le eŋudɔwɔwɔ ŋu ana nu nyuitɔ kekeake nado tso eme eye wòanɔ agbe didi.

 

Q6: Aleke wokɔa PVC ƒe xɔmenuwo ŋu heléa be nɛ?

A: PVC-mɔ̃a ŋu kɔklɔ le bɔbɔe, zi geɖe la, tsi kple mop koe wòhiãna ne wozãe vɔ. To vovo na xɔtunu aɖewo siwo wozãna tsã la, mehiã be woatsɔ nusiwo ɖea asi le eŋu hafi akɔ kɔkrit ɖe eme o. Lé ŋku ɖe nusiwo gblẽ ŋu edziedzi kple edzadzraɖo nyuie le adzɔge tso ɣe ƒe keklẽ tẽ gbɔ ne womele ezãm o nye nu vevi aɖe si ana eƒe nɔnɔme nanɔ anyi.

 

Q7: Ðe woate ŋu atrɔ asi le PVC ƒe xɔmenuwo ŋu le teƒeaa?

A: Ẽ, woate ŋu atso PVC-mɔ̃, aku, ahawɔ eƒe nɔnɔme le teƒea to atikpakpadɔwɔnu siwo wozãna ɖaa zazã me. Esia wɔnɛ be woate ŋu atrɔ asi le nu ŋu wòasɔ ɖe dɔa ƒe nuhiahiã tɔxɛwo nu. Gake ele be woakpɔ nyuie be woagagblẽ nu le xɔtunua ƒe xɔtuɖoɖo ƒe blibonyenye ŋu o.

 

Q8: Ðe PVC formwork sɔ na kɔnkrit xɔtunu siwo woƒo xlãe wɔwɔa?

A: Ẽ, PVC-mɔ̃a te ŋu trɔna bɔbɔe eye woate ŋu azãe atsɔ awɔ xɔtunu siwo woƒo xlãe. Alesi wòte ŋu bɔbɔnae la na wòsɔ na xɔtuɖaŋu vovovowo, siwo dometɔ aɖewoe nye sɔti goglowo kple gli siwo woƒo xlãe.

 

Q9: Aleke PVC formwork kpɔa ŋusẽ ɖe kɔnkrit mamlɛtɔ ƒe nuwuwu dzii?

A: Zi geɖe la, PVC formwork naa kɔnkrit si le gbadzaa ŋutɔ le eƒe anyigba si me ʋuʋudedi mele o ta. Zi geɖe la, esia ɖea dɔ bubuwo wɔwɔ ɖe kɔkrit la ŋu dzi kpɔtɔna alo megahiãna o, si wɔnɛ be ɣeyiɣi kple dɔwɔlawo ƒe gazazã dzi ɖena kpɔtɔna.

 

Q10: Ðe dedienɔnɔ ŋuti nya aɖewo le PVC-mɔ̃ zazã mea?

A: Zi geɖe la, wobua PVC formwork be ele dedie be woazã. Eƒe kpekpeme le bɔbɔe, si ɖea abi siwo woxɔna le nu kpekpewo kɔklɔ me dzi kpɔtɔna. Gake abe alesi wòle le xɔtunu ɖesiaɖe gome ene la, ele be woawɔ ɖe dedienɔnɔ ŋuti ɖoɖo nyuiwo dzi le eɖoɖo kple eɖeɖe me. Le dzo ƒe dedienɔnɔ gome la, zi geɖe la, wowɔa PVC-mɔ̃ nyuiwo ŋudɔ be dzo mate ŋu age ɖe eme o.