65 Ga si Wotsɔ Wɔe ƒe Nɔnɔme

Adzɔnuwo ƒe Nɔnɔmewo

Parameter Ŋuti	Nyatakakawo
Adzɔnuwo ƒe Ŋkɔ	Lianggong 65 Ga si Wotsɔ Wɔe ƒe Nɔnɔmetata
Formwork Panel ƒe Dɔwɔnu	Ga si wotsɔ ati sesẽ alo eucalyptus plywood si ƒe didime nye 15mm
Ga ƒe Frame	Q235B (GB/T700-2007) ƒe ɣeyiɣia me.
Plywood si wotsɔa lãgbalẽ wɔe	15mm film-faced ati sesẽ alo eucalyptus plywood
Kɔnkrit ƒe Nyaƒoɖeamenu	Vaseɖe 90 kN/million
Doa ƒe Adzɔge ƒe Asitɔtrɔ	50mm (trɔtrɔ ƒe dzidziɖedzi suetɔ kekeake) .
Panel ƒe Agbɔsɔsɔme Siwo Woɖo Ðe Ðoɖo Nu	Agbɔsɔsɔ enyi: 3000x1200, 3000x950, 3000x600, 1200x1200, 1200x950, 1200x600, 600x1200, 600x950, 600x600 mm
Sɔti ƒe Kpekpeɖeŋunu	Etsɔa ʋuƒoawo doa ka kple wo nɔewo le tsitrenu; si wotsɔ lock catch kple disk nut wɔe
Kplamatsedonu si wozãna ɖaa	Doa ka kple panels, atrakpui, casters, rebar regulators; dɔ geɖe wɔwɔ
Atrakpui & Dɔwɔwɔ ƒe Nuƒolanɔƒe	Enaa mɔnukpɔkpɔ si le dedie be woakɔ kɔkrit
Tasiaɖamfɔwo ƒe Ðoɖo	Ʋuʋu bɔbɔe kple bolt alo clamp kadodo; bia be dɔwɔla 1-2 koe nasu esi
Crane ƒe Kɔsɔkɔsɔ	Kɔkɔƒe si wotsɔ bla ɖe panel la ƒe akɔta
Chamfer ƒe ƒuƒoƒo	Edea ʋuƒoa ƒe goawo dzi be wòaɖe dzogoe ɖaɖɛwo ɖa
Push-Pull ƒe Prop	Enaa formwork la li ke eye wònana wònɔa tsitrenu
Subɔsubɔdɔ ƒe Agba si Ŋu Mɔɖeɖe Le	1.5 kN/million (150kg/million) Agba ƒe hatsotso 2 vaseɖe EN 12811-1:2003

Lianggong 65 Steel Frame Formwork nye xɔtunu, modular ɖoɖo si wowɔ be woate ŋu aƒo wo nu ƒu kabakaba eye woate ŋu atsɔ agba geɖe.

Akpa Veviwo

1. Formwork Panel
   Gakpo ƒe xɔtunu si ƒe didime nye 15mm alo eucalyptus plywood le panel la ŋu. Ete ŋu nɔa te ɖe kɔnkrit ƒe nyaƒoɖeamenu si ade 90 kN/million nu.

2. Steel Frame
   Wotsɔ Q235B gakpo wɔe, frame sia sesẽ eye kakaɖedzi le eŋu. Woɖea do siwo me woate ŋu atrɔ asi le la dome 50mm ɖesiaɖe, si wɔnɛ be woate ŋu atrɔ asi le wo ŋu pɛpɛpɛ.

3. Sɔtiwo ƒe Kpekpeɖeŋuna
   Sɔti ƒe Kpekpeɖeŋunu la doa ka kple ʋuƒoawo le tsitrenu, eye wòtrɔna ɖe sɔti ƒe lolome vovovowo ŋu.

4. Standard Clamp
   Standard clamps doa ka kple panels kple kpeɖeŋutɔwo abe atrakpuiwo, casters, kple rebar regulators, si wɔnɛ be woate ŋu azã wo le mɔ vovovowo nu.

Kpekpeɖeŋunuwo Kple Eƒe Nɔnɔmewo

• Atrakpui Kple Dɔwɔƒe : Esiawo naa mɔ dedie, si ŋu woléa ŋku ɖo be woakɔ kɔkrit.

• Tasiaɖamfɔwo ƒe Ðoɖo : Tasiaɖamfɔwo nana be woate ŋu aʋuʋu formwork bɔbɔe, si wɔnɛ be crane ƒe gazazã dzi ɖena kpɔtɔna.

• Crane Hook : Esia naa teƒe si woate ŋu akɔ nu le dedie, si wɔnɛ be teƒe bubu gbugbɔgaɖoɖo wɔa dɔ nyuie.

• Chamfer Strip : Wotsɔe de panel ƒe goawo dzi, eɖea dzogoe ɖaɖɛwo ɖa.

Viɖe Viɖewo

Nuɖoanyia ƒe akpa enyi ƒe lolome le ɖoɖo nu, tso 3000x1200mm va ɖo 600x600mm. Woate ŋu aƒo ʋuƒoawo nu ƒu be woaɖo kɔkɔme kple kekeme si hiã, eye woatrɔ asi le wo ŋu nyuie le teƒea.

la 65 Steel Frame Formwork ƒoa asitɔtrɔ le nɔnɔmewo ŋu kple eŋudɔwɔwɔ bɔbɔe nu ƒu, eye wòsɔ nyuie na xɔtudɔ deŋgɔwo.

Nu Vevi Siwo Le 65 Steel Frame Formwork me

Ðoɖowɔwɔ Kple Nu Vovovowo : 

Mɔ̃ɖaŋununya ƒe ɖoɖo si wowɔ be wòakpɔ xɔtuɖaŋu vovovowo gbɔ le teƒea.

Kpekpeme si le bɔbɔe kple Agbatsɔtsɔ ƒe Ŋutete Kɔkɔ : 

Aɖaŋu si me kɔ eye agbatsɔtsɔ geɖe le eŋu, si wɔnɛ be agba kpekpewo tsɔtsɔ yi teƒe bubuwo kple wo ŋudɔwɔwɔ le bɔbɔe.

Ʋuʋu Kaba : 

Kplamatsedonu tɔxɛwo nana be woate ŋu aƒo wo nu ƒu bɔbɔe, si wɔnɛ be woate ŋu atɔ nu kabakaba eye wònana xɔa tutu ƒe duƒuƒu nyona ɖe edzi.

Dɔwɔwɔ Nyuie Deŋgɔ : 

Ðoɖowɔwɔ nyuie kple eɖeɖeɖa wɔa nu kabakaba ɖe dɔa ƒe ŋgɔyiyi ŋu, si wɔnɛ be dɔwɔwɔ dzina ɖe edzi.

Panel ƒe Agbɔsɔsɔ Vovovowo : 

Enaa panel ƒe lolome enyi siwo sɔ siwo ƒo ƒu be woawɔ ɖe xɔtuɖaŋu ƒe nudidi vovovowo dzi.

Nusiwo Ŋu Ŋusẽ Le Kɔkɔe : 

Ga ƒe xɔtunu si wotsɔ Q235B nu wɔ, si wɔ ɖeka kple GB/T700-2007, si naa ŋusẽ kple enɔa anyi didina.

Plywood ƒe nyonyome : 

Ezãa 15mm ati sesẽ alo eucalyptus plywood si ƒe nyonyome deŋgɔ, si doa ŋusẽ eƒe anyinɔnɔ kple agbatsɔtsɔ.

Kɔkrit ƒe Nyaƒoɖeamenu si Ŋu Mɔɖeɖe Le : . 

Ete ŋu nɔa te ɖe kɔnkrit ƒe nyaƒoɖeamenu si ade 90 kN/million nu hena formwork ƒe dɔwɔwɔ si ŋu kakaɖedzi le.

Asitɔtrɔ le eŋu pɛpɛpɛ : 

50mm dometsotso le asitɔtrɔ dowo dome ɖea mɔ na tɔtrɔ pɛpɛpɛ na dɔa ƒe didi vovovowo.

Dɔwɔnu Geɖewo ƒe Kpekpeɖeŋunuwo : 

Sɔti ƒe kaƒomɔ̃wo, klatsa siwo wozãna ɖaa, kple kaƒomɔ̃ siwo wotsɔna ƒoa ƒu ɖe ɖoɖo nu hã le eme, si naa liƒo kple tɔtrɔ ɖe nɔnɔmewo ŋu kpena ɖe eŋu.

Dzadzraɖo Kple Eɖɔliɖɔli Blɔɖe : 

Plywood si le anyigba dzi la ɖɔliɖɔli le bɔbɔe; afɔɖeɖe bɔbɔe siwo nye riveting kple edge sealing kekea formwork ƒe agbenɔƒe ɖe edzi.

Gazazã nyuie : 

Alesi woate ŋu azãe ake eye womeléa be na wo boo o ɖea xɔtutu ƒe gazazã siwo xɔa ɣeyiɣi didi dzi kpɔtɔna.

Nu Si Tae Nàtia Mí

Aɖaŋuɖoɖo : . 

Te ɖe mía ŋu hena mɔfiame le Lianggong Formwork ɖoɖo nyuitɔ kekeake tiatia ŋu na wò dɔa ƒe nuhiahiãwo.

Mɔ̃ɖaŋudɔwɔla bibiwo : 

Míaƒe mɔ̃ɖaŋudɔwɔlawo daa wò nudidiwo, gazazã, kple ɖoɖowɔɖiwo kpɔna be yewoaɖo aɖaŋu na dɔnyala bibiwo.

Aɖaŋuɖoɖo Siwo Wotrɔ Asi Le : 

Míekpena ɖe mía ŋu míedea dzesi ɖoɖo si sɔ wu na mɔ̃ɖaŋununya ƒe ɖoɖowɔwɔ nyuie eye wòwɔa dɔ nyuie.

Mɔ̃ɖaŋununya ƒe Ðoɖowɔwɔ : 

Mɔ̃ɖaŋudɔwɔlawo wɔa Auto-CAD nɔnɔmetatawo tsɔ kpena ɖe teƒea dɔwɔlawo ŋu le xɔmenuwo kple xɔtunuwo ɖoɖo me.

Dɔa ƒe Egbɔkpɔnu Tɔxɛwo : 

Lianggong naa egbɔkpɔnu siwo wowɔ ɖe ɖoɖo nu na dɔa ƒe nuhiahiã vovovowo kple ɖoɖowɔwɔ ƒe nudidiwo.

Ŋuɖoɖo Kabakaba : 

Woɖoa nɔnɔmetata gbãtɔwo kple nyayɔyɔwo ɖe wo le ŋkeke aɖewo megbe tso esime woxɔ wò xɔtuɖoɖowo.

Teƒea Dzi Kpɔkpɔ : 

Míedzraa kpekpe ƒe nɔnɔmetatawo katã ɖo hafi adzɔnuwo va ɖo, si wɔnɛ be wo ɖoɖo le bɔbɔe eye wòwɔa dɔ nyuie.

Kpekpeɖeŋu na Gɔmedzelawo : 

Le ezãla yeyewo gome la, míenaa dɔdzikpɔlawo be woana hehe, ado alɔ wo, eye woalé ŋku ɖe wo ŋu le teƒea.

Nusiwo Wotsɔna Yia Nu Kabakaba : 

Ƒuƒoƒo aɖe si tsɔ wo ɖokui na kpɔa nudɔdɔ ƒe ɖoɖo bliboa dzi, tso ewɔwɔ dzi va ɖo nu yeyewo ɖoɖo ɖe amewo dzi.

Nuwɔwɔ Ŋuti Nyatakakawo : 

Míema ɖoɖowɔɖiwo, QC fotowo, kple videowo kple asisiwo le ewɔwɔ ƒe akpaa me.

Nubablɛ Siwo Le Dedie : 

Wobla nuwo katã ɖe ƒudzimɔzɔzɔ ƒe dzidzenuwo kple Incoterms 2010 ƒe nudidiwo nu.

Nyatakaka siwo ku ɖe agbalẽɖoɖoɖa ŋu : 

Wotsɔa meliɖoɖo ŋuti nyatakakawo, siwo dometɔ aɖewoe nye tɔdziʋua ƒe ŋkɔ, nugoe ƒe xexlẽdzesi, kple ETA, to e-mail dzi.

Nuŋlɔɖi Blibowo : 

Woɖoa agbalẽɖoɖoɖa ŋuti nuŋlɔɖi bliboa ɖe amewo to amedɔdɔ dzi alo woɖea wo ɖe go to telefon dzi ne wobia.